Home » Other valves » Check valve » PTFE PFA Lined Flanged Floating Ball Check Valve

PTFE PFA Lined Flanged Floating Ball Check Valve

FREE-VALVE’s PTFE PFA Lined Flanged Floating Ball Check Valve is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends

manual flange fluorine lined diaphragm valve

PFA Lined Check Valve Floating Ball

Content

FREE-VALVE’s PTFE PFA Lined Flanged Floating Ball Check Valve is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends.The valve uses PTFE as the rolling valve ball, the valve can be opened or closed by ball rolling up and down in the slide of the body chamber body under the medium acting.Under normal flow the valves solid PTFE ball is pushed away from it’s seat and fluid flows through the valve, in a backwards flow condition the ball is pushed firmly back into it’s seat and prevents flow through the valve stopping process, etc.

Features

1. The valve body adopts full bore, with large flow and small resistance.

2. Good sealing performance, noiseless closing, no water hammer.

3. Horizontal or vertical installation is acceptable.

4. Fully Lined Design to eliminate surface contact which provides maximum corrosion resistance

Technical Specification:

1. Size Range: DN15~DN200

2. Applicable Temperature: 0~200℃

3. Connection Type:Flange

4. Lining Material:PTFE , PFA , FEP

5. Body material:WCB, CF8 ,CF8M

6. Pressure test:GB/T13927, API598

7. Face to Face: GB/T12221, ASME B16.10

Application:

FREE-VALVE’s PTFE PFA Lined Flanged Floating Ball Check Valves are mainly used in cold water, chemical and other pipe networks to prevent media flow back.

Inquiry

More Check valve

FREE-VALVE’s Lined Ball Type Check Valve is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends.

Lined Ball type Check Valve F46

Composite Function Air Exhaust Valve body is barrel-shaped, and includes floats, stems and disc. The valves are used at the highest point on the pipe or where there is a closed gas and at the pump outlet for removing gas from the pipe, so that the pipe is working properly

Composite Function Air Exhaust Valve

FREE-VALVE’s PFA Lined Check Valve Floating Ball is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends

PFA Lined Check Valve Floating Ball

PTFE PFA Lined Flanged Floating Ball Check Valve

FREE-VALVE’s flat type FRH74X Single Plate Wafer Check Valves are installed in the piping system, their main function is to prevent medium from flowing backwards, the valves are swing type

flat type FRH74X Single Plate Wafer Check Valve

FREE-VALVE’s Wafer Type Single Plate Swing Check Valves are installed in the piping system, their main function is to prevent medium from flowing backwards, the valves are swing type ,and comes with a short pattern sandwich type flangeless wafer body conforming to the GB/T12221 and ASME B 16.10 face to face dimensions,

Wafer Type Single Plate Swing Check Valve

UPVC Swing check valve is designed for chemical working condition with anti corrosive performance .

UPVC Swing Check Valve

FREE-VALVE’s F46 Lined Ball Float Check Valve is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends.The valve uses PTFE as the rolling valve ball, the valve can be opened or closed by ball rolling up and down in the slide of the body chamber body under the medium acting

Check Valves Floating Ball Type

FREE-VALVE’s FRH44S UPVC body swing check valves are swing type and have a plastic disc that swings about a hinge pin or shaft, installed in the piping system, their main function is to prevent medium from flowing backwards, the valves are normally designed for horizontal flow condition, but can also be installed in vertical pipeline,

FRH44S UPVC body swing check valves

FREE-VALVE’s PTFE Floating Ball Check Valves is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends.The valve uses PTFE as the rolling valve ball, the valve can be opened or closed by ball rolling up and down in the slide of the body chamber body under the medium acting.

PTFE Floating Ball Check Valves