pneumatic and manual operating flat tank flush bottom valve

FREE-VALVE’s Manual operation Split body Y Type Slurry Valve is ideal for many applications because the valves are designed for use on abrasion materials. Manual operation Split body Y Type Slurry Valve is divided into left and right parts with a seat between them.

FREE-VALVE brand swing arc valves are designed for ash handling system.They use a spherical-shape dome and an inflatable-seal to ensure a 100% airtight seal.swing arc valve is unique in its ability to open and close with a tight pressure seal in environment where abrasive material are passing.Dome valve can achieve operating reliability in severe applications .

Open and close test for pneumatic ceramic lined double disc gate valve

Sealing pressure test for the ceramic lined V type ball valve ,test medium is Air

FREE-VALVE’s pneumatic and manual operating flat tank flush bottom valves are designed for the convenient and fast discharging the material or samples from the bottom of the reactor,drain or feed vessel .The valve can be welded or installed on the vessel through the flange at the bottom of the valve or on tank wall.

FREE-VALVE’s Pneumatic Ceramic Double Disc Gate Valve is mainly used in feeding and dumping the dry powder and the transport pipeline, which not only adopt toughening ceramic as shut off and wear out resistance material,

FREE-VALVE brand Stainless steel pneumatic ceramic lined knife gate valves are known as slurry gate valves.With simple structure and can cut off medium which contains solid particles and fibers, suitable for some very hard particles or serious erosive mediums.They are installed to replace general metal seated knife gate valves which will be washed out easily, especially suitable for any power plant located on sea side .

FREE-VALVE’s Pneumatic tungsten carbide seat double disc rotary swing valves are designed for pressurized and vacuum systems including dense and dilute phase pneumatic conveying systems, discharge and vent applications in steel plant and coal power. The double ceramic sealing faces of the valves are well ground and polished, which is ensure a reliable sealing performance of the valve,the valve is used to replace the dome valve in the pipe line of the ash system.

FREE VALVE Brand many sets pneumatic ceramic lined double disc gate valve will be deliveried to oversea market

The vedio show how the pneumatic three way change over valve working ,function test is made before the valve leave factory.

FREE-VALVE brand Pneumatic operated dome valves are designed for ash handling system.Dome valve is unique in its ability to open and close with a tight pressure seal in environment where abrasive material are passing.Dome valve can achieve operating reliability in severe applications .

Sealing Test For FREE-VALVE Brand Pneumatic Ceramic Lined Double Disc Gate Valve

Pneumatic metal seated double disc gate valve is designed for higher temperature in the fly ash system at coal power plant ,opening test is made before the valve leave factory.

Pneumatic ceramic lined double disc gate valve is designed for fly ash at ash handling system in coal fired power plant

FREE-VALVE’s Pneumatic Ceramic Rotary Gate Valves are designed for pressurized and vacuum systems including pneumatic conveying systems, discharge and vent applications in steel plant and coal power.

Pneumatic hard alloy double disc rotary gate valve is designed for higher temperature in the fly ash system at coal power plant

FREE-VALVE’s FRZ644TC Flange end Pneumatic Actuator Ceramic Twin Disc Balance Gate Valve is mainly used in feeding and dumping the dry powder and the transport pipeline, which not only adopt toughening ceramic as shut off and wear out resistance material

Stainless Steel Ceramic Lined Ball Valves are designed with engineering ceramics. The engineering ceramics internal parts provide excellent wear resistance and corrosive resistance , the stainless steel ceramic ball valves are widely used as an open and close function in corrosive and corosive medium with abrasive solids content.

Pneumatic hard alloy seated rotating disc gate valves are designed for higher temperature in the fly ash system at coal power plant ,less than 350 Degree

Electric three-way reversing slurry valve is an inverted process valve developed according to the alumina process, which adopts the design principle of superimposed multi-function valve, and is designed as a one inlet and two outlets structure,operated by electric actuator. Slurry diversion and conduction is realized by changing valve stem structural and seal of upper and lower valve body .

Pneumatic knife gate valve is installed at cement plant

Fluorine lined ball valve is designed to suit for any corrosive medium

DN100 PN10 pneumatic ceramic lined double disc gate valve

DN150 PN10 Pneumatic ceramic lined double rotary disc gate valves are packed into wooden box

FREE-VALVE’s FRJ545Y Y type slurry globe valve is ideal for many applications because the valves are designed for use on abrasion materials. 

The video shows the working process of pneumatic inflatable seat dome valve

Pneumatic metal seated rotating disc gate valve is designed for higher temperature in the fly ash system at coal power plant

Ceramic lined rotary disc gate valve is being machining at work shop by grinding machine

The video shows the installation process of the magnetic position sensor .

FREE-VALVE’s  Split body WCB Body Aluminum oxide Y type slurry valve  is ideal for many applications because the valves are designed for use on abrasion materials.  Split body WCB Body Aluminum oxide Y type slurry valve is divided into left and right parts with a seat between them. The bolt connecting the two parts can be dissembled to replace the valve seat.The valve with abrasion resistance,high pressure resistance,erosion resistance and anti-scabbing performance.