Home » Other valves » Check valve » flat type FRH74X Single Plate Wafer Check Valve

flat type FRH74X Single Plate Wafer Check Valve

FREE-VALVE’s flat type FRH74X Single Plate Wafer Check Valves are installed in the piping system, their main function is to prevent medium from flowing backwards, the valves are swing type

PTFE Floating Ball Check Valves

Wafer Type Single Plate Swing Check Valve

Content

FREE-VALVE’s flat type FRH74X Single Plate Wafer Check Valves are installed in the piping system, their main function is to prevent medium from flowing backwards, the valves are swing type ,and comes with a short pattern sandwich type flangeless wafer body conforming to the GB/T12221 and ASME B 16.10 face to face dimensions,the valve performs the same with Swing Check Valve with much less cost and has a simple but reliable and robust construction.

Features

1. The eccentric mounted hinge pin in combination with the disc seat guarantees a positive shut off of the returning medium.

2. Seat Ring is replaceable type.

3. Tightening torque to be applied on the companion flange bolting is lower due to face sealing O-rings.

4. Short Face-to-face.

5. Self centering in pipeline due to controlled outside diameter, enables easy installation.

6. The valves are suitable for mounting between weld neck or slip on type companion flanges of different standards.

Technical Specification:

1. Size Range: NPS2~NPS24,DN50~DN600

2. Applicable Temperature: 0~150℃

3. Connection Type: Wafer Type, Flangeless, Sandiwch Pattern

4. Sealing material: Rubber

5. Body material：WCB,stainless steel

6. Test standard：GB/T13927,API598

7. Flange To Flange:ANSI B 16.10,GB/T12221

Application:

FREE-VALVE’s flat type FRH74X Single Plate Wafer Check Valves are mainly used in water supply systems, supply air system,petroleum, chemical and other industrial sectors to have the most suitable place of installation space restrictions.

Inquiry

More Check valve

Composite Function Air Exhaust Valve body is barrel-shaped, and includes floats, stems and disc. The valves are used at the highest point on the pipe or where there is a closed gas and at the pump outlet for removing gas from the pipe, so that the pipe is working properly

Composite Function Air Exhaust Valve

FREE-VALVE’s PTFE PFA Lined Flanged Floating Ball Check Valve is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends

PTFE PFA Lined Flanged Floating Ball Check Valve

FREE-VALVE’s Lined Ball Type Check Valve is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends.

Lined Ball type Check Valve F46

FREE-VALVE’s flat type FRH74X Single Plate Wafer Check Valves are installed in the piping system, their main function is to prevent medium from flowing backwards, the valves are swing type

flat type FRH74X Single Plate Wafer Check Valve

FREE-VALVE’s PFA Lined Check Valve Floating Ball is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends

PFA Lined Check Valve Floating Ball

FREE-VALVE’s PTFE Floating Ball Check Valves is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends.The valve uses PTFE as the rolling valve ball, the valve can be opened or closed by ball rolling up and down in the slide of the body chamber body under the medium acting.

PTFE Floating Ball Check Valves

FREE-VALVE’s FRH44S UPVC body swing check valves are swing type and have a plastic disc that swings about a hinge pin or shaft, installed in the piping system, their main function is to prevent medium from flowing backwards, the valves are normally designed for horizontal flow condition, but can also be installed in vertical pipeline,

FRH44S UPVC body swing check valves

FREE-VALVE’s F46 Lined Ball Float Check Valve is straight type three piece design and manufactured in full port uni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends.The valve uses PTFE as the rolling valve ball, the valve can be opened or closed by ball rolling up and down in the slide of the body chamber body under the medium acting

Check Valves Floating Ball Type

UPVC Swing check valve is designed for chemical working condition with anti corrosive performance .

UPVC Swing Check Valve

FREE-VALVE’s Wafer Type Single Plate Swing Check Valves are installed in the piping system, their main function is to prevent medium from flowing backwards, the valves are swing type ,and comes with a short pattern sandwich type flangeless wafer body conforming to the GB/T12221 and ASME B 16.10 face to face dimensions,

Wafer Type Single Plate Swing Check Valve